??? 03/06/12 22:41 Modified: 03/06/12 23:43 Read: times |
#186458 - Z8051 USB On-Chip Debugger (OCD) Responding to: ???'s previous message |
Jan Waclawek said:
Jim Granville said:
What IS missing from Zilog, is a low cost Debug Connection 'dongle'. Without that it's all quite worthless - programming and debugging goes through the same I2C port. The OCD software looks reasonable, see http://abov.co.kr/eng/tool/ocd.php and http://abov.co.kr/data/mds/OCD_Manual.pdf Under Variable Watch, it says a rather cryptic "This menu is not enabled during emulation." ?! - I think perhaps that really means 'does not update while running', but does refresh at each step/break ? Going by other images, it seems there is a USB-OCD unit, using a DB25 shell, but with USB connector. I guess that comes with the $120 / $156 Devel options from Digikey,but not separately ? Zilog says this : [" Development Tool Kit: Z51F3220 MCU Development Kit (Z51F3220000ZCO) Kit Contents * Z51F3220 Development Board * Z8051 USB On-Chip Debugger (OCD) * Z8051 OCD Target Cable (10ckt) * USB Cable: A (male) to Mini-B Cable * Z8051 OCD Software and Documentation CDROM * Z51F3220 MCU Development Kit User Manual (UM0243) "] So it does sound standard USB-10p stuff. They just need a separate order item for * Z8051 USB On-Chip Debugger (OCD) * Z8051 OCD Target Cable (10ckt) * USB Cable: A (male) to Mini-B Cable * Z8051 OCD Software and Documentation CDROM Digikey ways end March and $99/$156, whilst Mouser says no dates but 3 on order (brave lads!) and $49.95/$99 The Mouser prices are much better... $49.95 gives Z51F0811000KITG Kit Contents * Z51F0811 Evaluation Board * Z8051 USB On-Chip Debugger (OCD) * Z8051 OCD Target Cable (10ckt) * USB Cable: A (male) to Mini-B Cable * Z8051 OCD Software and Documentation CDROM * Z51F0811 MCU Evaluation Kit User Manual (UM0242) Not as cheap as Silabs Toolstick, but tolerable. I'll try the SW and report back... : Installs OK, but lacks a Simulate mode, and disables most menus with no HW sensed. Files/names suggest it could use a Cypress FX2, which would give a good bandwidth. Not clear how symbols are managed, I can see no mention of OMF51 load, but you can manually define watch-vars. |