??? 06/11/13 01:47 Read: times |
#189915 - also try CLKREG Responding to: ???'s previous message |
Mikkel C. Simonsen said:
Using this code, I get 2.53mA with the ceramic resonator, and 2.41mA with the internal clock. Also try the LP214 CLKREG clock divider. the LP series are pretty much MHz linear, so a /16 here, will buy you a 1/16 in slope current, and let you find the ~origin-intercept Idd. CLKREG = [ TPS3 TPS2 TPS1 TPS0 – CDV1 CDV0 COE] CDIV1 CDIV0 Clock Out Frequency 0 0 f/2 0 1 f/4 1 0 f/8 1 1 f/16 See the LP52 for a diagram of how CDIV works (LP52 has more choices but the flow is the same). |
Topic | Author | Date |
Low-power MCU needed | 01/01/70 00:00 | |
OK, but wrong | 01/01/70 00:00 | |
Wrong how? | 01/01/70 00:00 | |
Silabs options | 01/01/70 00:00 | |
C8051F99x | 01/01/70 00:00 | |
Silabs | 01/01/70 00:00 | |
look it up | 01/01/70 00:00 | |
Looked up | 01/01/70 00:00 | |
f53, no | 01/01/70 00:00 | |
C8051F537A is OK | 01/01/70 00:00 | |
the current in active mode is not the issue | 01/01/70 00:00 | |
Inactive current | 01/01/70 00:00 | |
re: wrong | 01/01/70 00:00 | |
Consumers | 01/01/70 00:00 | |
Zilog Z51F0410 | 01/01/70 00:00 | |
Zilog | 01/01/70 00:00 | |
Check you are entering idle ? | 01/01/70 00:00 | |
idle current | 01/01/70 00:00 | |
Idle test | 01/01/70 00:00 | |
re: | 01/01/70 00:00 | |
It floats! It floats! | 01/01/70 00:00 | |
re:floats | 01/01/70 00:00 | |
re:floats | 01/01/70 00:00 | |
Timers | 01/01/70 00:00 | |
More idle tests | 01/01/70 00:00 | |
Better regulator? | 01/01/70 00:00 | |
LR8K4 450V regulator | 01/01/70 00:00 | |
also try CLKREG | 01/01/70 00:00 | |
Clk Dividers are a good idea | 01/01/70 00:00 | |
No dividers | 01/01/70 00:00 | |
LP52 is cheaper too... | 01/01/70 00:00 | |
LP52 | 01/01/70 00:00 | |
No GND pin? | 01/01/70 00:00 | |
re:idle | 01/01/70 00:00 | |
Totally idle | 01/01/70 00:00 | |
Checks | 01/01/70 00:00 | |
More checks | 01/01/70 00:00 | |
Power Down ? | 01/01/70 00:00 | |
test setup | 01/01/70 00:00 | |
STC | 01/01/70 00:00 | |
C8051F86x/85x ? | 01/01/70 00:00 | |
Maybe not such a good choice, after all? | 01/01/70 00:00 | |
Support? | 01/01/70 00:00 | |
'51 support | 01/01/70 00:00 |