??? 06/10/13 15:54 Read: times |
#189901 - Consumers Responding to: ???'s previous message |
Jacob Boyce said:
They are quoting the microcontrollers power consumption, but what about anything that you have connected to the microcontroller? Nothing is currently connected to the outputs, so nothing should consume any power. When something does get connected, it's a FET input, so the consumption should still be very close to zero. Mikkel |
Topic | Author | Date |
Low-power MCU needed | 01/01/70 00:00 | |
OK, but wrong | 01/01/70 00:00 | |
Wrong how? | 01/01/70 00:00 | |
Silabs options | 01/01/70 00:00 | |
C8051F99x | 01/01/70 00:00 | |
Silabs | 01/01/70 00:00 | |
look it up | 01/01/70 00:00 | |
Looked up | 01/01/70 00:00 | |
f53, no | 01/01/70 00:00 | |
C8051F537A is OK | 01/01/70 00:00 | |
the current in active mode is not the issue | 01/01/70 00:00 | |
Inactive current | 01/01/70 00:00 | |
re: wrong | 01/01/70 00:00 | |
Consumers | 01/01/70 00:00 | |
Zilog Z51F0410 | 01/01/70 00:00 | |
Zilog | 01/01/70 00:00 | |
Check you are entering idle ? | 01/01/70 00:00 | |
idle current | 01/01/70 00:00 | |
Idle test | 01/01/70 00:00 | |
re: | 01/01/70 00:00 | |
It floats! It floats! | 01/01/70 00:00 | |
re:floats | 01/01/70 00:00 | |
re:floats | 01/01/70 00:00 | |
Timers | 01/01/70 00:00 | |
More idle tests | 01/01/70 00:00 | |
Better regulator? | 01/01/70 00:00 | |
LR8K4 450V regulator | 01/01/70 00:00 | |
also try CLKREG | 01/01/70 00:00 | |
Clk Dividers are a good idea | 01/01/70 00:00 | |
No dividers | 01/01/70 00:00 | |
LP52 is cheaper too... | 01/01/70 00:00 | |
LP52 | 01/01/70 00:00 | |
No GND pin? | 01/01/70 00:00 | |
re:idle | 01/01/70 00:00 | |
Totally idle | 01/01/70 00:00 | |
Checks | 01/01/70 00:00 | |
More checks | 01/01/70 00:00 | |
Power Down ? | 01/01/70 00:00 | |
test setup | 01/01/70 00:00 | |
STC | 01/01/70 00:00 | |
C8051F86x/85x ? | 01/01/70 00:00 | |
Maybe not such a good choice, after all? | 01/01/70 00:00 | |
Support? | 01/01/70 00:00 | |
'51 support | 01/01/70 00:00 |