| JHD162A lcd | | 01/01/70 00:00 |
| 5V LCD | | 01/01/70 00:00 |
| in addition ! | | 01/01/70 00:00 |
| Matching output voltages with input requirements | | 01/01/70 00:00 |
| C8051F120 has 5V tolerant Input/Output pins | | 01/01/70 00:00 |
| Yes i have... | | 01/01/70 00:00 |
| careful | | 01/01/70 00:00 |
| what are... | | 01/01/70 00:00 |
| Powered components | | 01/01/70 00:00 |
| Thank You | | 01/01/70 00:00 |
| examples | | 01/01/70 00:00 |
| active level converters | | 01/01/70 00:00 |
| Resistors not good way to reduce voltage | | 01/01/70 00:00 |
| Thank You... | | 01/01/70 00:00 |
| Per forgot one thing | | 01/01/70 00:00 |
| R*C | | 01/01/70 00:00 |
| delay | | 01/01/70 00:00 |
| 5V and micro and LCD | | 01/01/70 00:00 |
| potentiometer | | 01/01/70 00:00 |
| Film Capacitor?? | | 01/01/70 00:00 |
| thank you so much | | 01/01/70 00:00 |
| SIL resistor | | 01/01/70 00:00 |
| new delhi | | 01/01/70 00:00 |
| Actually, it seems that they *do* know! | | 01/01/70 00:00 |
| SIL Residtor *network* | | 01/01/70 00:00 |
| correction...Yes they do know | | 01/01/70 00:00 |
| Port I/O pin voltage | | 01/01/70 00:00 |
| "5V-Tolerant" pins - already answered | | 01/01/70 00:00 |
| 5V tolerant, not 5V | | 01/01/70 00:00 |
| Thank You | | 01/01/70 00:00 |
| Maybe you can "get by" with this ... | | 01/01/70 00:00 |
| "Absolute Maximum Limits" are not Operating conditions | | 01/01/70 00:00 |
| That's true, it's an absolute maximum/minimum | | 01/01/70 00:00 |
| Agree | | 01/01/70 00:00 |
| 3V3 logic runs at "TTL levels" | | 01/01/70 00:00 |
| The HD44780 claims to respond to TTL levels ... but ... | | 01/01/70 00:00 |
| pull up resistor | | 01/01/70 00:00 |
| do not tie a pin to gnd | | 01/01/70 00:00 |
| many pull-ups | | 01/01/70 00:00 |
| Do you mean...? | | 01/01/70 00:00 |
| one more thing ... | | 01/01/70 00:00 |
| high impedence | | 01/01/70 00:00 |
| lcd EN signal | | 01/01/70 00:00 |
| It is a pre-clear | | 01/01/70 00:00 |
Thank You | | 01/01/70 00:00 |
