Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
???
01/07/10 14:39
Read: times


 		 #172237 - My question about the MCU can work with the 2Gbyte
Responding to: ???'s previous message
My question about the AT89C5131 can work with the 2Gbyte NAND Flash Memory or not? Regardless of the cost or how to get Memory with the low price, because I always knowing that 50K will get low price, doesn't it?

I also did research with SD card, it can get much more easier. The problems are higher power comsumption (I only can use Coin battery), the spaces for the slot to insert the SD card & the SD card itself. I also try with the Micro SD card, it is smaller but problems are the same in my case!

If the AT89C5131 can work with 2Gbyte NAND Flash Memory (or more), I consider my case is closed!

Thanks to any comments

List of 31 messages in thread
TopicAuthorDate
Can AT89C5131 work with 2Gbyte NAND Flash?            01/01/70 00:00      
   What do you think?            01/01/70 00:00      
      Thank for the reply            01/01/70 00:00      
         why bother            01/01/70 00:00      
            Lots of money for 2GB "regular" flash            01/01/70 00:00      
               depends on how much (s)he needs            01/01/70 00:00      
                  It depends on something else, too            01/01/70 00:00      
                     purchasing NAND flash            01/01/70 00:00      
                  And the need seems to be 2GB (or more)            01/01/70 00:00      
                     My question about the MCU can work with the 2Gbyte            01/01/70 00:00      
                        You'll have to select a specific nand flash IC            01/01/70 00:00      
                           the information is available!            01/01/70 00:00      
                              apparently, he doesn't want to read the datasheets            01/01/70 00:00      
                           NANDs tend to have a uniform hardware interface...            01/01/70 00:00      
                              I wouldn't be concerned about wear-leveling            01/01/70 00:00      
                                 wear leveling and address lines            01/01/70 00:00      
                                    micro-SD might be the answer            01/01/70 00:00      
                                       Thanks for all detail discussing            01/01/70 00:00      
                                          absolutely not!!!!            01/01/70 00:00      
                                             You know which one has small package (64-pin or less)?            01/01/70 00:00      
                                                find it here            01/01/70 00:00      
                                                   Thank for the good link            01/01/70 00:00      
                                          I suggest you consult pricewatch.com            01/01/70 00:00      
                                             Thanks for the link            01/01/70 00:00      
                                                You mean *minimum* - surely?!            01/01/70 00:00      
                                          I didn't think Canada was such a backwater!            01/01/70 00:00      
                                             If possible, can you identify some brand?            01/01/70 00:00      
                                                The usual suspects            01/01/70 00:00      
                                                   Thanks for the info.            01/01/70 00:00      
                                                He's right, you know ...            01/01/70 00:00      
                                                   Thanks for the info. & I will look for them            01/01/70 00:00      

Back to Subject List