| ??? 07/16/09 13:40 Read: times |
#167417 - Answers... Responding to: ???'s previous message |
- Connect the rectifier to the input cap via traces on the top layer. Do not change the layers.
- Put the vias connecting 0V and 5V to the inner layers much closer to the output cap pins!! - Omit L4 and L5. Lukas said:
But there are also switcher gnd planes on the layer IN2 and IN15 and I do not know if I can connect them also together. Connect them by many vias! Also, in each layer, there should be a connection of ground of input cap to ground of output cap, like shown in the top layer. Why do you feed one AC line of rectifier to other parts on your board? Is there elsewhere a rectifier on your board? This would not be a good idea! Kai |
| Topic | Author | Date |
| PCB design - ground plate... | 01/01/70 00:00 | |
| excuse... | 01/01/70 00:00 | |
| You can use a local ground plane, but... | 01/01/70 00:00 | |
| So, if I understand it well... | 01/01/70 00:00 | |
| Yes, of course, but... | 01/01/70 00:00 | |
| Yes, but... | 01/01/70 00:00 | |
| No overlap | 01/01/70 00:00 | |
| Version B, but without FB... | 01/01/70 00:00 | |
| so... | 01/01/70 00:00 | |
| PCB layout... | 01/01/70 00:00 | |
| Answers... | 01/01/70 00:00 | |
| EMC | 01/01/70 00:00 | |
| Hhm, I wouldn't do that... | 01/01/70 00:00 | |
| AC power supply | 01/01/70 00:00 | |
| ground vias | 01/01/70 00:00 | |
| Locating of vias... | 01/01/70 00:00 | |
| Thank you very much... | 01/01/70 00:00 | |
| Sideplating? Thermal vias? | 01/01/70 00:00 | |
| Stackup | 01/01/70 00:00 | |
| Not such a good idea | 01/01/70 00:00 | |
| interrupted/split planes | 01/01/70 00:00 | |
| Elaboration | 01/01/70 00:00 | |
| Thank you... | 01/01/70 00:00 | |
| Nice link, Rob! | 01/01/70 00:00 | |
| Elaboration | 01/01/70 00:00 | |
| Explanation | 01/01/70 00:00 | |
| Elaboration | 01/01/70 00:00 | |
| What you propose isn't well suited for 4 layer boards | 01/01/70 00:00 | |
Hi Kai | 01/01/70 00:00 |