Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
???
03/30/06 06:50
Read: times


 		 #113388 - Some speeds probably won't work
Responding to: ???'s previous message
Phillip M Gallo said:
Jacques,

Instead of Using MTK to interface to the DS'4x0, Try HyperTerminal. This is for diagnostic purposes. The PC will assert DTR such that you will be in "Bootloader" mode.

Just start up HyperTerminal (or ProComm, or Term, or ...) and press Enter.

Do you get the Boot Loader Msg?

regards,
p

What speed is the OP trying to connect to the bootloader at? There are some oscillator/port speed combinations that I've never gotten to work. I never looked into the reason though; it could simply have been the result of the autobaud routine not trying the rates in question.

Also, if you want another loader program try, grab my 89C4x0ldr-lite.

--Sasha Jevtic

List of 41 messages in thread
TopicAuthorDate
DS89C420 Bootloader issues            01/01/70 00:00      
   Well, check the app note.            01/01/70 00:00      
      doesn't run also with 24Mhz            01/01/70 00:00      
         Well, I don't know what to say ...            01/01/70 00:00      
            Errata for some series            01/01/70 00:00      
               Well ... let's wait a while            01/01/70 00:00      
                  I've got a rush job in front of me            01/01/70 00:00      
               B5 - Bootloader            01/01/70 00:00      
                  Have you tried ...            01/01/70 00:00      
                     Some speeds probably won't work            01/01/70 00:00      
                        Loader lite trial            01/01/70 00:00      
                  Symptoms            01/01/70 00:00      
   Loader            01/01/70 00:00      
   lock bits            01/01/70 00:00      
      I doubt it            01/01/70 00:00      
         That's what "they" say ...            01/01/70 00:00      
            naah            01/01/70 00:00      
               Smile when you say that ...            01/01/70 00:00      
      Lock Bits            01/01/70 00:00      
         trust but verify ...            01/01/70 00:00      
   It might be a different issue            01/01/70 00:00      
      Any needed?            01/01/70 00:00      
         perhaps some ...            01/01/70 00:00      
            The issue is not "can you find out it is            01/01/70 00:00      
               Not necessarily ...            01/01/70 00:00      
                  How'd you do that?            01/01/70 00:00      
                     Well i cheated ...            01/01/70 00:00      
                        Gee ... I learn new things every day.            01/01/70 00:00      
      It might be a different issue            01/01/70 00:00      
         the real problem            01/01/70 00:00      
            I get \'em as samples            01/01/70 00:00      
               Small volume part acquisition.            01/01/70 00:00      
                  that's seldom a problem for me            01/01/70 00:00      
               apples and oranges            01/01/70 00:00      
                  It's different here            01/01/70 00:00      
                     a mistake            01/01/70 00:00      
                        that rep WAS the local sales office            01/01/70 00:00      
                           I'm confused or you are            01/01/70 00:00      
                              These guys worked for Philips            01/01/70 00:00      
         Not breaking news, but seems relevant            01/01/70 00:00      
         it's still possibly a different issue            01/01/70 00:00      

Back to Subject List