| ??? 10/08/13 21:03 Modified: 10/08/13 23:14 Read: times |
#190039 - LCD Adapter Assembly / Cable |
A very common interface to character type LCD modules is a a row of 16 holes on 0.100 inch centers like can be seen in the following picture:
However it is common that an MCU PC Board utilizes the following type 2x8 ribbon cable header to support LCD modules. 
It is possible to make a ribbon cable that starts at the 2x8 end and then ends with the wires hand split apart and soldered into the row of holes on the LCD module. This is a painful and time consuming process so I am looking for some type of ready made cable or adapter assembly that I could solder all at once. Any one of you few remaining forum members seen something like I am talking about. Michael Karas |
| Topic | Author | Date |
| LCD Adapter Assembly / Cable | 01/01/70 00:00 | |
| headers and plugs | 01/01/70 00:00 | |
| Grunch On Ribbon Connectors | 01/01/70 00:00 | |
| Solution | 01/01/70 00:00 | |
| Point Taken | 01/01/70 00:00 | |
| two solutions | 01/01/70 00:00 | |
| Almost | 01/01/70 00:00 | |
| pin layout | 01/01/70 00:00 | |
| Re-Poking Pins | 01/01/70 00:00 | |
| I've seen this, but is it "standard"? | 01/01/70 00:00 | |
| Standard??? | 01/01/70 00:00 | |
| Doubtful if there is any standard what so ever. | 01/01/70 00:00 | |
Standard is probably a poor choice of terms ...  | 01/01/70 00:00 |