| ??? 05/29/10 12:23 Read: times |
#176295 - Use previous advice and keep receiver enabled Responding to: ???'s previous message |
Reading own data while transmitting is very good to do.
The received character will generate an interrupt at the end of the byte transfer, requiring a short delay before you may switch off the transmitter. If not being able to hear your own outgoing data, you will get an interrupt when the UART starts to send the last character, which means that you will have to wait a lot of bit times before the transmit of the last character is done and you may turn off the transmitter. It really is very advantageous to keep the receiver active at all timse. |
| Topic | Author | Date |
| Receiving serial bytes on 80C320 UART | 01/01/70 00:00 | |
| here | 01/01/70 00:00 | |
| Thanks - excellent FAQ | 01/01/70 00:00 | |
| "bible time" | 01/01/70 00:00 | |
| Truly biblical! | 01/01/70 00:00 | |
| My recommendation... | 01/01/70 00:00 | |
| Useful ideas - but I don't want to change the hardware | 01/01/70 00:00 | |
| You are absolutotally unconditionally confused | 01/01/70 00:00 | |
| !RI or /RE | 01/01/70 00:00 | |
| I'll re-answer the post above | 01/01/70 00:00 | |
| Use previous advice and keep receiver enabled | 01/01/70 00:00 | |
| This can't be right... | 01/01/70 00:00 | |
| How to get it working | 01/01/70 00:00 | |
| sometimes right, sometimes wrong | 01/01/70 00:00 | |
| e-mailed to Steve, Craig --- forum FYI | 01/01/70 00:00 | |
| We're getting there... | 01/01/70 00:00 | |
| I believe you are corect.... | 01/01/70 00:00 | |
| join the club | 01/01/70 00:00 | |
| "No other way??" | 01/01/70 00:00 | |
in my (personal) opinion | 01/01/70 00:00 | |
| what is "other code" ? | 01/01/70 00:00 |