| ??? 03/03/09 06:54 Read: times |
#163014 - Settings Responding to: ???'s previous message |
Brian Reid said:
I have the baudrate set to 9600, 8 bits, 1 stop bit, and no flow control in HyperTerminal and believe I have the same settings in the above code. What am I missing here? Parity? |
| Topic | Author | Date |
| serial comm problem | 01/01/70 00:00 | |
| what about TI? | 01/01/70 00:00 | |
| thank you | 01/01/70 00:00 | |
| Be better... | 01/01/70 00:00 | |
| no luck | 01/01/70 00:00 | |
| Settings | 01/01/70 00:00 | |
| What is your XTAL frequency ? | 01/01/70 00:00 | |
| parity and XTAL | 01/01/70 00:00 | |
| Eh ? | 01/01/70 00:00 | |
| one or the other | 01/01/70 00:00 | |
| my mistake | 01/01/70 00:00 | |
| scope pictures | 01/01/70 00:00 | |
| whatizit? | 01/01/70 00:00 | |
| where I measured it... | 01/01/70 00:00 | |
| waveforms look OK | 01/01/70 00:00 | |
| question | 01/01/70 00:00 | |
| LSBit comes first after startbit | 01/01/70 00:00 | |
| cable | 01/01/70 00:00 | |
| isolation and ESD protection | 01/01/70 00:00 | |
I have blown very few, if any, MAX232's | 01/01/70 00:00 | |
| Your scope trace looks normal | 01/01/70 00:00 | |
| more pics | 01/01/70 00:00 | |
| show picture at PC side | 01/01/70 00:00 |