Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
???
02/25/09 16:16
Read: times


 		 #162826 - Have you read...
Responding to: ???'s previous message
...my post http://www.8052.com/forum/read/162791 ?

Chris said:
1MPH = 1344h
5MPH = 380h
10MPH = 1C0h
30MPH = 96h
60MPH = 4Ah
120MPH = 26h
150MPH = 1Dh
200MPH = 16h


I would use a look-up table. Two entries for the maxmum and minimum ticks for each speed.

Kai

List of 49 messages in thread
TopicAuthorDate
Tip for Speed sensor via External Interrupt            01/01/70 00:00      
   Fresh thoughts.            01/01/70 00:00      
      Try measuring time instead of count for slow pulse trains            01/01/70 00:00      
         The highest frequency would be            01/01/70 00:00      
            Once more - think time instead of frequency            01/01/70 00:00      
            Rough estimation...            01/01/70 00:00      
         On the teatering edge......            01/01/70 00:00      
            Is that not good enough?            01/01/70 00:00      
               I was having issues with that.....            01/01/70 00:00      
                  Did you read this post?            01/01/70 00:00      
                     I think that's the bullseye, I was forgetting....            01/01/70 00:00      
                     Yes, and your solution is in my code...perfect!            01/01/70 00:00      
                        Happy that it works            01/01/70 00:00      
                           I'm using this model.....at least            01/01/70 00:00      
                           I'm using this model.....at least            01/01/70 00:00      
                           Looks like I was blind to the obvious.            01/01/70 00:00      
                              All depends on the input scale            01/01/70 00:00      
                                 That will be the next step.......            01/01/70 00:00      
                                 Per,            01/01/70 00:00      
                                    Would this work for a Random() Seeding?            01/01/70 00:00      
                                       Thermal noise from a diode            01/01/70 00:00      
                        Bisection.            01/01/70 00:00      
                           I was a bit hasty ...            01/01/70 00:00      
   PLL ?            01/01/70 00:00      
      Stability            01/01/70 00:00      
         Yes, for a car            01/01/70 00:00      
            Are you sure?            01/01/70 00:00      
               your math is correct            01/01/70 00:00      
                  Ok, can you please explain...            01/01/70 00:00      
                     Should be minute not seconds, typo            01/01/70 00:00      
                        Two questions...            01/01/70 00:00      
                           Yes, 3.3V is right and works correctly            01/01/70 00:00      
                              Have you read...            01/01/70 00:00      
                                 In more detail...            01/01/70 00:00      
                                 It would take forever to go through all the combos            01/01/70 00:00      
                                    This is no log function, ...            01/01/70 00:00      
                                       This is my solution, and almost there            01/01/70 00:00      
                              do you read datasheets???            01/01/70 00:00      
                                 Yes/No            01/01/70 00:00      
                                    better perfomance if ...            01/01/70 00:00      
         The PLL approach isn't that hopeless...            01/01/70 00:00      
   period measurement            01/01/70 00:00      
      Here is an image of what I think you mean?            01/01/70 00:00      
         what derivative do you use?            01/01/70 00:00      
            I'm using the NXP LPC936            01/01/70 00:00      
         Your drawing is still in the frequency domain            01/01/70 00:00      
            Yes, you're correct, and I undestand, connecting...            01/01/70 00:00      
            Where I'm at and software recap            01/01/70 00:00      
               more step-by-step            01/01/70 00:00      

Back to Subject List