| ??? 05/19/10 23:21 Read: times |
#176042 - acceptable baud-rate error Responding to: ???'s previous message |
I usually assume that 2% is a common rule-of-thumb worst-case acceptable error.
-a |
| Topic | Author | Date |
| Baud RateTolerance? | 01/01/70 00:00 | |
| acceptable baud-rate error | 01/01/70 00:00 | |
| 100% ?? | 01/01/70 00:00 | |
| 2.5% | 01/01/70 00:00 | |
| whoa!! | 01/01/70 00:00 | |
| I prefer < 0.5% | 01/01/70 00:00 | |
| the method | 01/01/70 00:00 | |
| skew/asymmetry | 01/01/70 00:00 | |
| Asymmetry | 01/01/70 00:00 | |
| ZERO | 01/01/70 00:00 | |
| So do I... | 01/01/70 00:00 | |
| Not always possible to select crystal just for UART | 01/01/70 00:00 | |
| In reference to the above: | 01/01/70 00:00 | |
| Thank you all. | 01/01/70 00:00 | |
| Try a test with a PC and Sqr Sig Gen | 01/01/70 00:00 | |
| likely a wromg approach | 01/01/70 00:00 | |
| Maxim AN-2141 | 01/01/70 00:00 | |
link and comment | 01/01/70 00:00 |