| ??? 02/24/09 17:51 Read: times |
#162761 - Mission Accomplished Responding to: ???'s previous message |
I think the problem was software because after writting robust serial comms protocol that has a CRC , parity, framing error checking and correction, problem was solved.
I did connect the 7 clocks and total length of the wire was about 80 meters and I did put terminating resisors at the start of the bus and at the last end after 80 meters as the application note stated with no stars and all my clocks are synchronized and doing their job happily. Mahmood |
| Topic | Author | Date |
| RS485 problem | 01/01/70 00:00 | |
| Just 1? | 01/01/70 00:00 | |
| The 120 ohm resistor | 01/01/70 00:00 | |
| VCC = 5V | 01/01/70 00:00 | |
| you need | 01/01/70 00:00 | |
| Scope? | 01/01/70 00:00 | |
| daisy chain | 01/01/70 00:00 | |
| Some hints... | 01/01/70 00:00 | |
| 100 meters | 01/01/70 00:00 | |
| 7 clocks | 01/01/70 00:00 | |
| Topology | 01/01/70 00:00 | |
| RE: topology | 01/01/70 00:00 | |
| don't | 01/01/70 00:00 | |
| Yes, don't! | 01/01/70 00:00 | |
| Getting there | 01/01/70 00:00 | |
| So, what was the cause of failure? | 01/01/70 00:00 | |
| not yet | 01/01/70 00:00 | |
| with additional components | 01/01/70 00:00 | |
| Where do you have this circuit from? | 01/01/70 00:00 | |
| from my Mentor | 01/01/70 00:00 | |
| Ben's site | 01/01/70 00:00 | |
| Mission Accomplished | 01/01/70 00:00 | |
| I'm not sure I agree | 01/01/70 00:00 | |
| exactly | 01/01/70 00:00 | |
| Maybe I misunderstood your earlier post | 01/01/70 00:00 | |
no | 01/01/70 00:00 | |
| yes | 01/01/70 00:00 | |
| then how could you ask .. | 01/01/70 00:00 | |
| With noise+etc reduction | 01/01/70 00:00 | |
| email updated | 01/01/70 00:00 | |
| here's info's........ | 01/01/70 00:00 | |
| That means you get | 01/01/70 00:00 | |
| Only when seeing nosie? | 01/01/70 00:00 | |
| Not exactly but as per requirement | 01/01/70 00:00 | |
| CAT5 ethernet cable | 01/01/70 00:00 | |
| 100 Ohm | 01/01/70 00:00 | |
| More details here | 01/01/70 00:00 | |
| did you check the FAQ? | 01/01/70 00:00 |