??? 02/20/09 12:28 Modified: 02/20/09 12:36 Read: times |
#162592 - Not exactly but as per requirement Responding to: ???'s previous message |
Per Westermark said:
Are you saying that the termination resistors should only be used when using a very long cable and experience noise on that long cable???
That sounds like a very random rule. Not exactly , If the link is slower and short distance or in clean environ ment home/office etc termination wont be required and also we can save power. -Ap Oh as you didnt quote the entire , I just read and edited the typo please see here ; http://www.8052.com/forum/read/162589 |
Topic | Author | Date |
RS485 problem | 01/01/70 00:00 | |
Just 1? | 01/01/70 00:00 | |
The 120 ohm resistor | 01/01/70 00:00 | |
VCC = 5V | 01/01/70 00:00 | |
you need | 01/01/70 00:00 | |
Scope? | 01/01/70 00:00 | |
daisy chain | 01/01/70 00:00 | |
Some hints... | 01/01/70 00:00 | |
100 meters | 01/01/70 00:00 | |
7 clocks | 01/01/70 00:00 | |
Topology | 01/01/70 00:00 | |
RE: topology | 01/01/70 00:00 | |
don't | 01/01/70 00:00 | |
Yes, don't! | 01/01/70 00:00 | |
Getting there | 01/01/70 00:00 | |
So, what was the cause of failure? | 01/01/70 00:00 | |
not yet | 01/01/70 00:00 | |
with additional components | 01/01/70 00:00 | |
Where do you have this circuit from? | 01/01/70 00:00 | |
from my Mentor | 01/01/70 00:00 | |
Ben's site | 01/01/70 00:00 | |
Mission Accomplished | 01/01/70 00:00 | |
I'm not sure I agree | 01/01/70 00:00 | |
exactly | 01/01/70 00:00 | |
Maybe I misunderstood your earlier post | 01/01/70 00:00 | |
no![]() | 01/01/70 00:00 | |
yes | 01/01/70 00:00 | |
then how could you ask .. | 01/01/70 00:00 | |
With noise+etc reduction | 01/01/70 00:00 | |
email updated | 01/01/70 00:00 | |
here's info's........ | 01/01/70 00:00 | |
That means you get | 01/01/70 00:00 | |
Only when seeing nosie? | 01/01/70 00:00 | |
Not exactly but as per requirement | 01/01/70 00:00 | |
CAT5 ethernet cable | 01/01/70 00:00 | |
100 Ohm | 01/01/70 00:00 | |
More details here | 01/01/70 00:00 | |
did you check the FAQ? | 01/01/70 00:00 |