| ??? 11/23/07 22:47 Read: times |
#147344 - done that many times Responding to: ???'s previous message |
in the 90s I was converting digital radio clocks brought from us which work on 60 Hz to 50Hz by soldering the pin 50/60 of the chip to gnd. Manufacturers design the clock chips to work for both 50Hz and 60 Hz. The problem is that you rarely find the datasheet of the clock chip to find out the required pin. But if you were lucky you will find a jumper on the PCB that says 50/60.
I still have a databook called ECG which shows the pinouts of many strange ICs which are impossible to find on the internet. If you still have problems let me know the chip number and I will try to look it up for you. Mahmood |
| Topic | Author | Date |
| 120V ac 60Hz from 230V ac 50Hz | 01/01/70 00:00 | |
| Go back to the USA... | 01/01/70 00:00 | |
| For a clock? | 01/01/70 00:00 | |
| I know of quartz stabilized inverters | 01/01/70 00:00 | |
| Thanks for the ideas.. | 01/01/70 00:00 | |
| I confess, the idea with the camping inverter... | 01/01/70 00:00 | |
| Kai - I know what you meant | 01/01/70 00:00 | |
| Kai - I know what you meant | 01/01/70 00:00 | |
| Look at the chip inside | 01/01/70 00:00 | |
| done that many times | 01/01/70 00:00 | |
| That was so kind of you. | 01/01/70 00:00 | |
| Maybe you could take a photo of the innards... | 01/01/70 00:00 | |
| OK will post the photo of the innards... | 01/01/70 00:00 | |
| Are you allowed to open the clock? | 01/01/70 00:00 | |
| Buy an Inverter | 01/01/70 00:00 | |
| Alternative | 01/01/70 00:00 | |
| Another alternative | 01/01/70 00:00 | |
| Phase lock loop | 01/01/70 00:00 | |
| Brilliant! | 01/01/70 00:00 | |
| 50 percent duty cycle | 01/01/70 00:00 | |
| Horses for Courses | 01/01/70 00:00 | |
| ??? | 01/01/70 00:00 | |
Avoid butchering the clock | 01/01/70 00:00 |