| ??? 01/30/12 13:53 Modified: 01/30/12 14:03 Read: times |
#185724 - you've got plenty of suggestions Responding to: ???'s previous message |
no one giving me any suggestion
1) it has been suggested you post some code for one task not a big lump nobody has the time to check 2) it has been suggested you concentrate on one task (e.g. the display, e.g. the serial comm) 3) what you have posted so far only read one way "give me code" a combination of 1) and 2) will lead to assistance Erik PS re 1) you may note that posting a big lump of code only get comments on the first few lines since nobody has the time to check a full program. also, starting to debug the whole mess is the wrong approach remove (you can save it elsewhere) all code not related to ONE task and debug, then post the reduced code and the debugging results not "it does not work" but something like "my scope show the pulse on p1.3 as being 200uS, the datasheet -insert link- for the 99c66 (or whatever) states it should be 500uS, what can I do" |
