bit banging program touble | | 01/01/70 00:00 |
why? | | 01/01/70 00:00 |
i need a second serial port | | 01/01/70 00:00 |
something like this , without any warranty : | | 01/01/70 00:00 |
a good start would be ... | | 01/01/70 00:00 |
only 3 'U's are commingout of 100 | | 01/01/70 00:00 |
Separate the characters and look with scope | | 01/01/70 00:00 |
finally it worked | | 01/01/70 00:00 |
uart receiver in software | | 01/01/70 00:00 |
No I/O or No Timing | | 01/01/70 00:00 |
"No I/O or No Timing" | | 01/01/70 00:00 |
Someday you will learn... | | 01/01/70 00:00 |
this isnt the actual code | | 01/01/70 00:00 |
Well then another lesson to learn... | | 01/01/70 00:00 |
Assembler Manual will help you | | 01/01/70 00:00 |
assembler manual? | | 01/01/70 00:00 |
Data is 8 Bit?? | | 01/01/70 00:00 |
Bit width timing and timer TH0,TL0 Values | | 01/01/70 00:00 |
checked values for TH0 and TL0 | | 01/01/70 00:00 |
keil baud rate Calculator not for bit bang | | 01/01/70 00:00 |
LSB first | | 01/01/70 00:00 |
now reception.... | | 01/01/70 00:00 |
1) din = din >> 1 | | 01/01/70 00:00 |
working at 1200 baud | | 01/01/70 00:00 |
delayRS() | | 01/01/70 00:00 |
why do i have to sample stop bit | | 01/01/70 00:00 |
Need not, but should | | 01/01/70 00:00 |
because | | 01/01/70 00:00 |
Much to a real UART | | 01/01/70 00:00 |
1.5 bit delay | | 01/01/70 00:00 |