Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
???
01/18/10 18:10
Read: times


 		 #172551 - not worth it
Responding to: ???'s previous message
1) Having programmed only the philips 8051 chips before, I am used to burning the program on the chip using Flash Magic ( which has been designed only for NXP chips). In the case of the C8051F344 which software can be used for this purpose?
the software is free from SILabs, you will need a 'dongle' also available from SILabs ($35 if I remember)

2) I'm planning to build my own development board for this chip. Any suggestions? Will the datasheet be enough for this purpose?
not worth it, the devboard price includes the dongle, making the devboard practically free. If you abasolutely insist on building your own, the schematic for the devboard is on the website.

NOW, be aware that the SILabs chips are 3v3 chips and you will need level conversion if your remaining circuitry requires 5V

Erik

List of 41 messages in thread
TopicAuthorDate
Controlling multiple servo motors            01/01/70 00:00      
   executing code takes time            01/01/70 00:00      
      PWM code            01/01/70 00:00      
         Thanks...now, about the PCA timer..            01/01/70 00:00      
   If SDCC Then Keil            01/01/70 00:00      
      PWM IRQ code in C, bitops, 45 byte            01/01/70 00:00      
         Optimization having no effect.            01/01/70 00:00      
      PWM IRQ code in C, lookup table, 32 byte            01/01/70 00:00      
         I haven't understood the table lookup concept very well...            01/01/70 00:00      
            table lookup            01/01/70 00:00      
         PWM IRQ code in C, lookup table, 30 byte            01/01/70 00:00      
            Compiler specifics            01/01/70 00:00      
               absolutely-locating xdata at 256 byte boundary            01/01/70 00:00      
                  I see.            01/01/70 00:00      
            An example code..            01/01/70 00:00      
               Keil: Specifics and non-specifics            01/01/70 00:00      
                  Not really working...            01/01/70 00:00      
                     Enough power?            01/01/70 00:00      
                        RE: running 32 servo motors            01/01/70 00:00      
      The chip sounds perfect...            01/01/70 00:00      
         not worth it            01/01/70 00:00      
            Servo control will become difficult then...            01/01/70 00:00      
               output            01/01/70 00:00      
               HCT chips have ...            01/01/70 00:00      
                  Eval a concept with a single PCA and 3:8 HCT multiplexer?            01/01/70 00:00      
               Check their website            01/01/70 00:00      
                  Here is the code...            01/01/70 00:00      
                     "sbit MTRS=P2^0;" is not OK here            01/01/70 00:00      
                        Keil syntax?            01/01/70 00:00      
                           "#define" not working.."sbit" works            01/01/70 00:00      
                              Yes, you were correct originally!            01/01/70 00:00      
            Seconded            01/01/70 00:00      
   Servo_0.1.zip            01/01/70 00:00      
      links            01/01/70 00:00      
   Eventually feed the guys at http://servomaster.sf.net ?            01/01/70 00:00      
      servomaster.sf.net FLOSS            01/01/70 00:00      
   Maybe of some use...            01/01/70 00:00      
      Whoops... found a bug            01/01/70 00:00      
         What bug?            01/01/70 00:00      
            Bug            01/01/70 00:00      
   Improved version uploaded            01/01/70 00:00      

Back to Subject List