| ??? 07/14/08 12:12 Read: times |
#156683 - from the OP Responding to: ???'s previous message |
The turns ratio is 230:9, and the secondary is rated for 9 mA. The effective load on the bridge is 18 Kohm, so the secondary current should be about 0.5 mA. The transformer is rated at .9 VA, so it's running well below that. In fact, I finally heard back from the manufacturer and the only suggestion they had was to reduce the load to about 3 kohm because the transformer "doesn't like to be lightly loaded". Haven't been able to try that yet. |
| Topic | Author | Date |
| Voltage sense circuit drift problem | 01/01/70 00:00 | |
| Transformers | 01/01/70 00:00 | |
| thanks | 01/01/70 00:00 | |
| You Could measure the Temperature | 01/01/70 00:00 | |
| You would have to measure! | 01/01/70 00:00 | |
| OFF load ?? | 01/01/70 00:00 | |
| AC Grid | 01/01/70 00:00 | |
| Sense mains voltage directly | 01/01/70 00:00 | |
| RE: get a proper voltage transformer | 01/01/70 00:00 | |
| isolation with a divider | 01/01/70 00:00 | |
| Load | 01/01/70 00:00 | |
| from the OP | 01/01/70 00:00 | |
| I hate transformer makers | 01/01/70 00:00 | |
| Time to get them in, then? | 01/01/70 00:00 | |
I made some experiences... | 01/01/70 00:00 |