| ??? 02/03/10 21:36 Read: times |
#172873 - 5v Flash 8051 (low pin count) |
Before I go and drop a PSoC into a new design :-P , I thought I should check with the well-informed (8051) masses.
I need a part that will interface with some legacy 5v electronics (Analog Devices D/A, 4000 series CMOS, and some discrete electronics that I have no control over). What I would like to have in an 8051 is a flash micro in a low pin count package, but not too low. ;-) I need about digital 21 I/O pins plus a UART. I would like the part to support a flash boot loader and it must be physically pretty small, since it has to fit on a board about 0.5" by 1.5" yet not require exotic soldering methods. I can handle various surface mount, but not BGA or those ones with the pads underneath (QFN/MLF). Unfortunately some older PSoC parts fit the bill. |
| Topic | Author | Date |
| 5v Flash 8051 (low pin count) | 01/01/70 00:00 | |
| NXP: LPC9xx? | 01/01/70 00:00 | |
| Older? | 01/01/70 00:00 | |
| WHY 5v??? | 01/01/70 00:00 | |
| Yes they have the M8 core | 01/01/70 00:00 | |
| SiLabs Parts Can Interface 5V logic | 01/01/70 00:00 | |
| re SILabs | 01/01/70 00:00 | |
SiLabs | 01/01/70 00:00 | |
| LPC900 are 5V input tolerant | 01/01/70 00:00 | |
| See App Note cited earlier | 01/01/70 00:00 | |
| 5-volt LP9xx1? | 01/01/70 00:00 | |
| check also | 01/01/70 00:00 |