| ??? 05/16/11 15:43 Read: times |
#182250 - SILabs reset Responding to: ???'s previous message |
The SiLabs eval board that is part of the transmitter end of the project also has an R/C reset and that is working OK for this type of project.
A frequently repeated post on the SILabs forum is "remove the cap on reset". This is a consensus of the forum regulars. The SILabs chips actually have a very good supervisor and a long time ago (the Cygnal days) some well meaning fool decided to add a "noise suppression cap" which, while possibly removing somebodys noise, converted an excellent supervisor into a RC reset. Just check the "schematic" in the datasheet and you'll see. Erik |
| Topic | Author | Date |
| Using an AT89C4051 | 01/01/70 00:00 | |
| Well...dumb issue as usual ... | 01/01/70 00:00 | |
| hex2bin | 01/01/70 00:00 | |
| Hex2Bin | 01/01/70 00:00 | |
| Anyone else here used one of these recently | 01/01/70 00:00 | |
| a few remarks | 01/01/70 00:00 | |
| A Quick Reply | 01/01/70 00:00 | |
| a quick one time thing to be used for a gag | 01/01/70 00:00 | |
Indeed! | 01/01/70 00:00 | |
| SILabs reset | 01/01/70 00:00 |