| ??? 11/27/09 13:07 Read: times |
#171230 - programming lpc932 with just RX,TX |
Hello,
I have troubles with flashmagic and programming lpc93x chips. I also have MCB 900 board, which programs (same) chips with no problems. I want to program lpc's with just a TX, RX, GND lines, entering bootloader with a break detect function. After reading articles on 8052.com and other sites, it is still unclear to me, what should I include in my code to be able to enter bootloader by break detect. I included line AUXR1 |= 0x40; // enable break detect in my code, but this is obvious not enough. Also I disabled option "use DTR and RTS to enter ISP mode". Is there any other option to tell flashmagic to use break detect? Thanks for help! Damjan |
| Topic | Author | Date |
| programming lpc932 with just RX,TX | 01/01/70 00:00 | |
| read the FlashMagic info and ... | 01/01/70 00:00 | |
| i've read it | 01/01/70 00:00 | |
| Press Reset while PSEN is low. | 01/01/70 00:00 | |
| Three Pulses | 01/01/70 00:00 | |
| DO NOT substitute | 01/01/70 00:00 | |
| some progress... | 01/01/70 00:00 | |
... problem solved! | 01/01/70 00:00 |