| ??? 10/07/09 14:09 Read: times |
#169496 - No problem Responding to: ???'s previous message |
Hi Jan!
I am actually working with that chip, programming with Flip. I only had one problem: the chips (PLCC44 from Digikey) have the FCB (Fuse Configuration Byte) bits 2 to 0 with 011, wich means that after reset, the bootloader will be executed! Simply, when load the program with Flip, set FCB to the desire value: bit7 X2 mode (0: 6 clocker), and bits 2 to 0: 111 (reset at 0x0000) or what ever you need (table 20 page 34 specs). Daniel |
| Topic | Author | Date |
| ISP problems with AT89C51RE2 | 01/01/70 00:00 | |
| No problem | 01/01/70 00:00 | |
| bootloader mode does not start | 01/01/70 00:00 | |
| about the chip being "zapped" ... | 01/01/70 00:00 | |
yes, the "zapping" sounds unlikely... | 01/01/70 00:00 |