| ??? 02/11/09 09:51 Read: times |
#162274 - Throughput Responding to: ???'s previous message |
The baud rate simply affects the timing of the bits on the UARTs pins - you also need to ensure that the rest of your system is fast enough to cope with data arriving at this rate!
At a minimum, you need to guarantee that your software can read a byte from SBUF before the next one arrives; otherwise the previous byte will be overwritten - and lost! This is where having a 6/4/2/1 clocker could make a difference... |
| Topic | Author | Date |
| How to set baud rate 115200 in 89c51 | 01/01/70 00:00 | |
| no | 01/01/70 00:00 | |
| yes if you have a six clocker and better | 01/01/70 00:00 | |
| 6 clock mode has NOTHING to do with timers | 01/01/70 00:00 | |
| but it will affect the throughput | 01/01/70 00:00 | |
| The key is the Clock Distribution | 01/01/70 00:00 | |
| I would be surprised... | 01/01/70 00:00 | |
| Plenty of options for UART | 01/01/70 00:00 | |
| Throughput | 01/01/70 00:00 | |
Thanks | 01/01/70 00:00 |