| ??? 01/31/09 08:22 Read: times |
#161862 - I will start with why? Responding to: ???'s previous message |
You do not realize how big a task this is.
First you will need a USB Host or a USB on the go chip to interface your CPU the USB. Then you will need a driver. You will have to contact the printer manufacture and see if they will give you that information. Try the FDTI Viniculim chip it may get you part way there. Or try to find some USB on the go chips and check for Appnotes. Good Luck |
| Topic | Author | Date |
| interface Inkjet printer to AT89S52 Microcontroller | 01/01/70 00:00 | |
| USB Host required; Winprinter? | 01/01/70 00:00 | |
| don't even thing about it | 01/01/70 00:00 | |
OTG | 01/01/70 00:00 | |
| I will start with why? | 01/01/70 00:00 | |
| Change AT89S52... | 01/01/70 00:00 | |
| gobbelygook | 01/01/70 00:00 | |
| Technically | 01/01/70 00:00 | |
| there are...NXP also have | 01/01/70 00:00 | |
| name one | 01/01/70 00:00 | |
| Are they?? | 01/01/70 00:00 | |
| at Ceibo with XA MCS-51 | 01/01/70 00:00 | |
| Link, please | 01/01/70 00:00 | |
| 16 and 32-bit 8051 upgrades?? | 01/01/70 00:00 |